Agriculture aspect

It is a scientific fact that use of our magnetic water devices for treatment of irrigation water will improve water productivity and will lead to significant water savings for the irrigation sector, minimize soil salinity and sustain the health of the environment. The implementation of magnetic water treatment technology by the irrigation sector will be a significant benefit to the global environment, as well as to the individual farmer.

Hybrid technologies provide magnetic technologies that alter the structure of water molecules. Regular water molecules cluster without magnetization. Toxins and waste products build up causing molecule clusters to be much larger in size, increasing surface tension, increasing viscosity and limiting dissolvability and permeability of water. This results in poor water productivity as only a small percentage of water and nutrients applied are dissolved and made available for plants to take up at fine root zones. Magnetic treatment breaks up the molecules to smaller clusters allowing them to pass through plant capillaries more readily.

After magnetization, the molecules line up in sequence

“+-+-“ resulting in reduced surface tension, reduced viscosity, increased dissolvability, increased permeability and increased oxygen content hence making nutrients more readily available to our body, plants and soils. Water is then said to be biologically “alive”.

Why treat water

Benefits to your agri business.

The key parameters that influence the magnetic treatment are the velocity of water flow in the pipe and the intensity of magnetic induction.

Magnetic treatment to your water supply can:

Reduce  water  usage  by  minimum  10%  and  up  to 30% 

Reduce fertilizer usage 

Reduce pesticide and herbicide usage 

Increase yields by at least 20% 

Improve taste of produce 

Increase shelf life of produce 

Improve soil pH and remove/dissolve impurities from soils year after year 

Increase nutrient content in produce 

Increase seed germination percentage and speed of seedling emergence 

Increase fine root growth 

Drastically reduce heat stress 

Increase water flow 

Saving energy and resource 

Prevent and remove scaling from irrigation pipes 

Makes traditionally unusable saline water usable and increases water productivity 

Soil   desalinization   takes   effect   in   the   first   year 

1/1.5 meters 

Increase productivity and reduce disease in live stock and general animal breeding 

Increase weight and reduce disease in aquaculture industry 

It is a scientific fact that the use of Hybrid technology’s magnetic water devices to treat irrigation water will improve water productivity and thus lead to significant water savings. In the context of current and future water scarcity, even a small savings in irrigation water (conservatively say 10%) through magnetic treatment will translate to huge savings nationally.

Scientific studies have shown Hybrid’s magnetic technology can be put in practice by farmers to improve water productivity, save water, minimize the occurrence of TDS and metals and sustain the health of the environment. The technology has proven to make use of lower quality waters (effluent and saline water) more sustainable and overall will augment water supplies for agricultural purposes. In general, the use of Hybrid’s technology will help improve long-term viability of the agricultural industry and sustainable economic development in both urban and rural areas.

Magnetically treated water can:

Save a significant amount of water 

Improve water productivity 

Increase yield produced per gallon of water used 

Improve quality of produce 

Increase shelf life 

Enrich taste 

Minimize the salinity effect and cleanse soil 

Reduce chemical usage 

Sustain the health of the environment. 

Why treat water

Water salinity control with magnetic water

Soil salinity is one of the most serious agricultural problems. The cause of this process is the accumulation of salts in soil capillaries leading to a sharp decrease in plant fertility. Salt concentration left in plant capillaries, with insufficient amount of nourishing substances leads to plants dying.

Magnetic systems developed by Hybrid make it is possible to use traditionally unsuitable salty water (salt content of 410L/G) efficiently for irrigating crops. Obviously, when you irrigate with salty water, you subsequently increase the level of soil salinity, which interferes with plant nutrient absorption. After magnetic treatment of water, there is a change of the physiochemical characteristics of water leading to improved filtration and dissolvability e.g. plant capillaries start to let either salt crystals or crystals of different chemical elements and suspensions pass.

Magnetically treated water washed 3-4 times more salts out of the soil than non-magnetized water and at the same time oxygen concentrations increased by 10%.

Saline and/or sodic soil is caused by four separate conditions:

High salt in the parent material and low rainfall (low leaching), 

High rainfall with poor internal drainage, 

High water table that carries salt to the soil surface, 

High amount of salt being applied through chemicals, manure and poor quality irrigation water. 

Before a reclamation system can be established, the factors causing salt accumulation must be eliminated.

Ions most commonly associated with soil salinity include the anions: chloride (Cl-), sulphate (SO4=), carbonate (HCO3-), and sometimes nitrate (NO3-) and the cations: sodium (Na+), calcium (Ca++), magnesium (Mg++), and sometimes potassium (K+). Salts of these ions occur in highly variable concentrations and proportions.

Effect of salinity on crop production

Plant growth and yield are limited mainly by the soil environment factors. Soil, water, nutrients, salinity, sodicity, structure, temperature, pH, and mineral toxicities can all interact to limit plant growth. In Saline soils although pH (<8.5) and ESP (<15%) are not high, CEC is >4 mmhos/cm and an excess of soluble salt in the subsoil restricts water uptake by crops; in the case of alkalinity there are Nutrient deficiencies (either because of a lack of nutrients, or because roots are unable to access them). The best way of understanding these limitations is to consider them in terms of the interacting factors that directly influence crop growth.

Why treat water

Water salinity control with magnetic water

Reduce Soil Salinity Magnetized Water Technology

For over 30 years Proffessor. Yuri Tkachenko and his team of scientists researched the effects of magnetic fields on plants and a method of magneto-hydro dynamical activisation of irrigation waters. From this research exciting new applications have been developed and tested in Europe, Middle East and Australia. The applications include physical-chemical changes of irrigation water parameters, resulting in improvement of filtration properties and in an increase in the dissolving properties of water.

Research shows that these changes result in an increased ability of soil to get rid of salts and results in a better assimilation of nutrients and fertilizer in plants during the vegetation period. Plants irrigated with magnetized water easily take up mineral salts from the soil and no sediment is formed on the soil surface.

The advantages of using magnetic water for irrigating crops are as follows:

 Vegetation period decreases by 15-20 days, therefore the crops ripe 15-20 days earlier than normal

Crop production increases from 15% to 100% 

Plant disease rates dramatically decrease 

The taste of agricultural products improves 

The photographs below show results from an experiment that included using salt water for irrigation of different plants. In each case, the salt content of the water was 10000 PPM. The results shown on the left are those where magnetized water was used with seeds that had undergone magnetic treatment. The results on the right are those from the control group where non-magnetized water and untreated seeds were used.

Why treat water

Seed germination with magnetic water

Seeds self-preservation energy differs at different stages of lifecycle development. During harvest, seeds contain different energy levels and not all planted seeds will grow. This is the reason for an increase of the sowing norm, and also the cause for excess costly seed material usage.

Hybrid Technology has developed a new technology and a device that deals with magnetic treatment of seeds before sowing. This technology not only allows spending 30-50% less money on the sowing material, but also enables an earlier harvest ripening. Scientists of Hybrid Technology have conducted experiments in different regions using this technology. Study results show that seeds, which were treated, using magnetic field, grow faster. Also the property of magnetic field to activate the process (created by a specific device made by Hybrid Technology) speeds up protein formation, providing for the growth of roots and activating growth processes in weak seeds.

Experiments have shown the vital importance of choosing the right lunar phase while magnetizing seeds and to magnetize seeds affected by fungous diseases during the first half of the day. For example, it is better to magnetize wheat seeds during the new moon, cucumber during the last quarter of the lunar phase, tomato during full moon and carrot in the first quarter of the lunar phase.

This technology has been applied in Russia, Ukraine, Byelorussia, Uzbekistan, UAE, Malaysia, Indonesia and Egypt, with a considerable decrease in the ripening time and an increase in the quality of vegetables, fruits and cereals and allowed for an increase of harvest by 12-36%, and in some cases up to 100% and more.

Hybrid Technology offers a wide choice of devices for magnetization of seeds to our customers. These devices can be used as successfully at home for growing plants and flowers, as in small and large industries (i.e. storehouses, large agricultural companies, etc.).

Seeds are the resting system of organs of a future plant. The quality and virility of the plant will depend upon the quality of this system. Magnetic treatment of seeds improves seed quality, germination properties and growth

Seeds prepared for magnetizing before sowing must be from one group with controlled seeds, identical by lineage, reproduction and conditions of storing. Seeds from different layers should be thoroughly mixed and humidity should not be more than 14%. Multiplicity of the treatment is not important.

The physiological method to define magnetized seeds' productivity is found by measuring the length of the embryonic root. Experiments have proven that plants with good embryonic root growth speed during transition from heterotrophic to autotrophic type of nourishment are more productive and create more developed root systems.

Why treat water

Produce farming with magnetic water

Magnetically treated water can be an excellent benefit to your produce growing operation. Magnetically treated water offers the small-scale farmer all the benefits available to the large agribusiness.

Magnetically treated water can help you:

Save a significant amount of water 

Improve water productivity 

Increase yield produced per gallon of water used 

Improve quality of produce 

Increase shelf life 

Enrich taste 

Minimize the salinity effect and cleanse soil 

Reduce chemical usage 

Sustain the health of the environment. 

All these results can be achieved by installing Hybrid Technology’s technology in your irrigation line. The technology placed along your water line helps to alter the structure of water molecules. Regular water molecules cluster without magnetization. Toxins and waste products build up causing molecule clusters to be much larger in size, increasing surface tension, increasing viscosity and limiting dissolvability and permeability of water. This

results in poor water productivity as only a small percentage of water and nutrients applied are dissolved and made available for plants to take up at fine root zones. Magnetic treatment breaks up the molecules to smaller clusters allowing them to pass through plant capillaries more readily

After magnetization, the molecules line up in sequence “+-+-“ resulting in reduced surface tension, reduced viscosity, increased dissolvability, increased permeability and increased oxygen content hence making nutrients more readily available to our body, plants and soils. Water is then said to be biologically “alive” and aids plants in healthier and more robust growth cycles.

Why treat water

Animal farming with magnetic water

Based on a wide range of experimental materials, Hybrid Technology states that magnetized water has special biological properties. Magnetized water has been shown to benefit the growth and development of some bone structure in chickens and other animals. Observations have shown, for example, that chicks drinking magnetically treated water had an increase in their bone formation process as well as improved blood morphology. Experiments with magnetized water used for chicks also showed a decrease by 2-3 times of death rates and an increase of mass (average weight gain increases by 5-7%), egg-laying qualities by 10%. Also the quality of meat improved

Magnetically treated water can also help the sometimes-difficult process of milking. It is not uncommon for a dairy animal’s udders to be rigid and therefore slow down the mechanic milking process. Using our method reduces the firmness of the udder and effectively makes it easier to milk. Dairy animals that drink magnetically treated water also show signs of enhanced disease resistance. Magnetically treated water will allow you to drastically decrease the amount of bacteria in milk and can also be used for hygienic cleaning of buildings where animals live. Finally, installment of special magnetic systems on the main line, that supplies milk after milking the cows, will increase storage time of milk in containers two fold.

Magnetically treated water also can be beneficially used in animal breeding. Due to the special biological properties

instilled during magnetization of the water, an accumulation of protein, not fat, builds in animals' bodies. For example, consumption of magnetic water for drinking purposes by pigs and calves, using our method, results in the formation of less fat deposits and in high quality of meat. Overall, any animal breeder or farmer can use Hybrid Technology’s magnetic systems and devices and see a wide Array of productiveness such as:

Increase milk production by approx. 10% 

Increase fat content of milk by 0,13 - 0,15% (standard fat content of milk is 3,2%) 

Increase of average weight gain in calves by up to 35% 

Increase of average weigh gain in piglets by up to 48% 

Increase of average weight gain in lamb by up to 12% 

Increase of average weight gain in rabbits up to 10% 

Improve taste qualities of meat 

Decrease disease and death rates by approx. 2 times 

 In this era of increasing fuel prices, here a device called ‘FUEL ENERGIZER’ help us to Reduce Petrol /Diesel /Cooking gas consumption up to 28%, or in other words this would equal to buying the fuel up to 28% cheaper prices. When fuel flow through powerful magnetic field created by Magnetizer Fuel Energizer, The hydrocarbons change their orientation and molecules in them change their configuration. Result: Molecules get realigned, and actively into locked with oxygen during combustion to produce a near complete burning of fuel in combustion chamber.


Today’s hydrocarbon fuels leave a natural deposit of carbon residue that clogs carburetor, fuel injector, leading to reduced efficiency and wasted fuel. Pinging, stalling, loss of horsepower and greatly decreased mileage on cars are very noticeable. The same is true of home heating units where improper combustion wasted fuel (gas) and cost,

money in poor efficiency and repairs due to build-up. Most fuels for internal combustion engine are liquid, fuels do not

combust until they are vaporized and mixed with air. Most emission motor vehicle consists of unburned hydrocarbons, carbon monoxide and oxides of nitrogen. Unburned hydrocarbon and oxides of nitrogen react in

the atmosphere and create smog. Smog is prime cause of eye and throat irritation, noxious smell, plat damage and decreased visibility. Oxides of nitrogen are also toxic. Generally fuels for internal combustion engine is compound of

molecules. Each molecule consists of a number of atoms made up of number of nucleus and electrons, which orbit their nucleus. Magnetic movements already exist in their molecules and they therefore already have positive and negative electrical charges. However these molecules have not been realigned, the fuel is not actively inter locked with oxygen

during combustion, the fuel molecule or hydrocarbon chains must be ionized and realigned. The ionization and realignment is achieved through the application of magnetic field created by ‘Fuel Energizer’.

Fuel mainly consists of hydrocarbon and when fuel flows through a magnetic field, such as the one created by the fuel energizer, the hydrocarbon change their orientation and molecules of hydrocarbon change their configuration. At the same time inter molecular force is considerably reduced or depressed. These mechanisms are believed to help disperse oil particles and to become finely divided. This has the effect of ensuring that fuel actively interlocks with oxygen producing a more complete burn in the combustion chamber. The result is higher  engine out put, better fuel economy and reduction in hydrocarbons, carbon monoxide and oxides of nitrogen that are emitted though exhaust. The ionization fuel also helps to dissolve the carbon build-up in carburetor, jets, fuel injector and combustion chamber, there by keeping the engines clear condition. Also it works on any vehicle or device (cooking gas stove) using liquid or gas fuel.


• More mileage (up to 28% increase) per liter due to 100%

burning fuel.

• No fuel wastage.

• Increased pick-up.

• Reduced engine noise.

• Reduced smoke.

• Faster A/C cooling.

• Smooth running, long term maintenance free engine.

• 30% extra life for expensive catalytic converter.


Magnetizer fuel energizer (eg:- Neodymium super conductor –

NSCM) is installed on cars, trucks immediately before carburetor or

injector on fuel line. On home cooking gas system it is installed just

before burner.


The simplest of hydrocarbons, methane, (CH4) is the major (90%) constituent of natural gas (fuel) and an important source of hydrogen. Its molecule is composed of one carbon atom and four hydrogen atoms, and is electrically neutral. From the energy point of view, the greatest amount of releasable energy lies in the hydrogen atom. Why? In octane (C8H18) the carbon content of the molecule is 84.2%. When combusted, the carbon portion of the molecule will generate 12,244 BTU (per pound of carbon). On the other hand, the hydrogen, which comprises only 15.8% of the molecular weight, will generate an amazing 9,801 BTU of heat per pound of hydrogen. Hydrogen, the lightest and most basic element known to man, is the major constituent of hydrocarbon fuels (besides carbon and smaller amount of sulphur and inert gases). It has one positive charge (proton) and one negative charge (electron), i.e. it possesses a dipole moment. It can be either diamagnetic or paramagnetic (weaker or stronger response to the magnetic flux) depending on the relative orientation of its nucleus spins. Even though it is the simplest of all elements, it occurs in two distinct isomeric varieties (forms) - para and ortho. It is characterized by the different opposite nucleus spins. In the para H2 molecule, which occupies the even rotation levels (quantum number), the spin state of one atom relative to another is in the opposite direction ("counterclockwise", "antiparallel", "one up & one down"), rendering it diamagnetic; whereas in the ortho molecule, which occupies the odd rotational levels, the spins are parallel ("clockwise", "coincident", "both up"), with the same

orientation for the two atoms; therefore, is paramagnetic and a catalyst for many reactions. Thus, the spin orientation has a pronounced effect on physical properties (specific heat, vapor pressure) as well as behavior of the gas molecule. The coincident spins render orthohydrogen exceedingly unstable. In fact, orthohydrogen is more reactive than its parahydrogen

counterpart. The liquid hydrogen fuel that is used to power the space shuttle or rockets is stored, for safety reasons, in the less energetic, less volatile, less reactive parahydrogen form. During the start of the shuttle, the orthohydrogen form is beneficial since it allows to intensify the combustion processes. To secure conversion of para to ortho state, it is necessary to change the energy of interaction between the spin state of the H2 molecule. Design of fuel energizers: a) fragment of a rocket fuel energizer

Ruskin, 1958)

: b) a"Magnetizer".(P.Kulish,1984

diagram of a part of fuel)

ATOM OF HYDROGEN IN ITS PARA AND ORTHO STATE Any utility patent must be proven operable and scientifically correct before issuance. The same principle has been utilized, and the same effect has been achieved by the action of the Magnetizer where a strong enough flux field was developed to substantially change the hydrocarbon molecule from its para state to the higher energized ortho state. The spin effect of the fuel molecules can be ascertained optically, based on refraction of light rays passing through liquid fuel as had been demonstrated by scientists while using infrared cameras installed, e.g. in metallurgical ovens where the Magnetizer’s had been effectively

working. Furthermore, the conversion of hydrogen into ortho H2 (taking place very fast in this strong & unique magnetic field, with the simultaneous transformation of the system from a symmetrical into highly active anti-symmetrical molecular state of increased reactivity and catalytic ability) has been found highly advantageous in many technologies, especially those where hydrogen is used. Hydrocarbons have basically a "cage-like" structure. That is why oxidizing of their inner carbon atoms during the combustion process are hindered. Furthermore, they bind into larger groups of pseudocompounds. Such groups form clusters (associations). The access of oxygen in the right quantity to the interior of the groups of molecules is hindered. (It has nothing to do with incoming air from the manifold in the fuel mixture when even though there may be excess of it, this will not provide the required hydrocarbon-oxygen binding.) and stemming from this shortage of oxygen to the cluster that hinders the full combustion. In order to combust fuel, proper quantity of oxygen from air is necessary for it to oxidize the combustible agents. For many years, designers of the internal combustion engines have had one goal: to oppose the effect of molecular association of the hydrocarbon fuel and to optimize the combustion process. The peculiar problem in designing engines for air pollution is that in order to fully burn all the hydrocarbons in the combustion chamber, operating temperatures of the cylinders have had to be increased. While older engines may have produced relatively large quantities of unburned

 hydrocarbons and carbon monoxide, they produced low quantities of oxides of nitrogen. Also, with the renewed interest in performance engines, compression ratios are creeping upward again, and once again the mechanism for producing higher levels of nitrogen toxins is increased. Similarly, turbo charging effectively alters the compression ratio of a vehicle, further adding to the nitrogen problem. The feed and exhaust systems have been perfected, the ignition controlling electronics has been perfected, the fuel/air mix metering devices have been brought to perfection, and finally the catalytic converters (see below) have been found indispensable. But even then, fumes that leave the "afterburners" are not ideally clean - engine still

burns only part of the fuel (or precisely the incompletely oxidized carbon atoms in the form of CO). The rest is discharged as polluting emissions (HC, CO, NOx) or is deposited on the internal engine walls as black carbon residue. All this has been caused by the incomplete combustion process. The reasons for it being that:

Hydrocarbons form the so-called associations, close molecular groups, interior of which is deprived of access of the

suitable amount of air; the lack of oxygen impedes the full combustion.

Note: The tendency of HC molecules to cluster causes local

macro-groupings (condensing) of molecules to clog the pipes and fuel nozzles. The excess of air in the fuel mixture will not provide for the complete combustion. Hence, the exhaust fumes contain considerable

amounts of unburned CO, HC, and soots. • Oxygen with negative 2 valence is negative, and hydrocarbon has neutral molecular structures, which by passing through steel fuel lines gets negatively (micro) charged. Therefore, when these two atoms come together with the same potential in a combustion chamber, they repel, which result in incomplete combustion. Therefore, all serious research has been aimed at bringing about fuel reactivity with oxygen (oxygenated fuels);

since increased oxidation means increased combustion, and the following rules had to be taken into consideration:

Rule 1: Unburned hydrocarbon (HC) as well as carbon monoxide (CO) emitted from a vehicle's exhaust system can be viewed as the additional fuel reserve, since, if proper conditions are met, HC & CO can be further burned in the combustion chamber. Therefore, creating such proper combustion conditions is paramount.

Rule 2: Hydrogen's chemical reaction, determined by its valence (the electron "surplus" in the "outer" orbital shell), is affected by a

magnetic field since proper magnets are the prime source of control of the position of electrons.

Rule 3: The application of a proper magnetic field enforces beneficial changes in fuel structure and enhances its general reactivity in the combustion process.

Rule 4: If a hydrocarbon molecule could better bind with oxygen

molecules (be more completely oxidized), then the toxicity of fumes would be considerably limited and in principle, one could dispense with catalytic converters.